Better Homes And Gardens Grill Replacement Parts Patio Furniture720-0783w

Home > Better Homes and Gardens Grill Models > Better Homes and Gardens 720-0783W

To help insure that you get the correct replacement parts for your Better Homes and Gardens grill, we recommend that you measure your original parts and compare them to what we have listed below. This is best done with the old parts out of the grill. Verify your Better Homes and Gardens model number.

Replacement grill parts for the Better Homes and Gardens 720-0783W

720-0783W Burners

Stainless steel tube burner for Better Homes and Gardens model 720-0783W.

Part Number: 10381
Dimensions: 15� x 1�
Material: stainless steel
Weight: 0.5

720-0783W Cooking Grids

Cast iron cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 66342
Dimension Front-to-Back: 17 1/4�
Dimension Side-to-Side: 26 1/2�
Material: gloss cast iron
Weight: 10.1

720-0783W Heat Plates

Porcelain steel heat plate. Sold individually.
WARNING: This is the porcelain steel version of CLA-TS0157. The parts have the same dimensions except this version has a �height� that is 3/16� shorter than CLA-TS0157. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: 97371
Dimension Front-to-Back: 14 9/16�
Dimension Side-to-Side: 3 1/4�
Material: porcelain steel
Weight: 0.55

720-0783W Flame Tamers

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a �height� that is 3/16� taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16�
Dimension Side-to-Side: 3 1/4�
Material: stainless steel
Weight: 2.16

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16�
Dimension Side-to-Side: 3 1/4�
Material: stainless steel
Weight: 2.88

Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16�
Dimension Side-to-Side: 3 1/4�
Material: stainless steel
Weight: 0.72

720-0783W Igniter Components

Universal battery powered push button ignitor.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8� mounting hole
Overall dimensions: 2� x 3 3/8� x 3�
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

47� wire with female spade connector and square plastic connectors. Used with battery powered spark generators.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14� ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 07370
Dimensions: 4 3/16� x 0 3/4�
Material: ceramic
Weight: 0.1

720-0783W Heat indicators and Meat Thermometers

heat indicator for Better Homes and Gardens model 720-0783W.

Part Number: 00012
Dimensions: 2 3/8� x 2 3/8�
Weight: 0.1

720-0783W Accessories

Cast iron smoker box. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 7.75" x 3.75" x 2".

Part Number: 00150
Material: cast iron
Weight: 2.93

4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.

Part Number: 40070
Material: stainless steel
Weight: 2.12

2 Piece stainless steel basting set for convenient grillside basting.

Measurements inside bowl for accurate sauce preperation
Stainless steel bowl
Hardwood handle brush

Part Number: 14913
Weight: 0.6

Deluxe non-stick flat spit basket. Attaches to 3/8� rotisserie rod with adjustable lid to secure food. 16�x7.5�x2�
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2� x 16�
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.